Delivery & build-up
You arrive by van, unload at the hall and build your stand on Tuesday. This page covers how to get there, the venue rules and what we will confirm later.
- Build-up Tue 9 Mar 2027
- Breakdown Thu 11 Mar 2027, from 16:00
- Power connection included
Getting to the delivery entrance
This is deliberately not the visitor address. Deliveries reach the hall via Carl-Zeiss-Straße; in town, follow the “LOKHALLE Anlieferung” signs.
From the A7 to the delivery entrance
- A7, exit 72 Göttingen-Nord.
- Continue on the B27.
- Take the exit B3 Göttingen-Lutteranger/Northeim.
- Turn right towards Im Rinschenrott.
- Continue along Maschmühlenweg.
- Join Bahnhofsallee; at its end turn right onto Groner Landstraße (B3).
- At the Premier Inn hotel, just before the Otto-Frey-Brücke bridge, turn right into Carl-Zeiss-Straße.
- Follow the “LOKHALLE Anlieferung” signs.
At the gate
Ring at the first, green gate. The bell is on the left.
- Delivery route
- Sat-nav: Otto-Frey-Brücke
- Lokhalle
Route based on the Lokhalle’s delivery directions, which still refer to the hotel on Carl-Zeiss-Straße as Holiday Inn Express.
Own schematic drawing. Positions based on © OpenStreetMap contributors (ODbL).
Schedule
Exact times for build-up, deliveries and breakdown will follow with the exhibitor documents.
- Tue 9 Mar 2027Exhibitor build-up
Times to follow
to follow - Wed 10 Mar 2027Show day 1
10:00–18:00. From 18:30, the LEDTEK Night in a separate part of the hall.
- Thu 11 Mar 2027Show day 2 and breakdown
Show 10:00–16:00, breakdown from 16:00.
Gates, vehicles and parking
Gates
The Lokhalle’s gates are at ground level, at least 3.70 m wide and 3.90 m high. The hall takes vehicles up to 40 t.
to follow We will tell you which gate to use in the exhibitor documents.
Vans
Drive up to the hall to load and unload, then move your vehicle. The site is car-free; only registered vehicles may stay at the hall.
Note: according to OpenStreetMap, the P2 multi-storey has a clearance of only 2.00 m.
Parking at the hall: Tue 9 – Thu 11 March 2027, €60 net per car or van. Buy the ticket in the exhibitor shop of the exhibitor portal (online payment), print it on A4 and place it behind the windscreen.
Lorries, forklifts, heavy loads
Coming with a lorry or trailer? Please let us know in advance. If you need a forklift or pallet truck, ask early.
Inside the hall, move heavy loads only on trolleys or pallet trucks with rubber wheels. Please tell us beforehand about very heavy exhibits.
Quiet hours from 10 pm to 6 am
The Lokhalle is right in town. At night:
- Load only inside the hall with the gates closed. Open gates only to drive in or out.
- Pause noisy work while a gate is open.
- No work outside: no forklifts, no waste disposal.
- Engines off.
- Lokhalle security checks this and may stop work.
Power on your stand
230 V / 10 Aone Schuko socket per stand, included in the stand price- That is roughly 2.3 kW. Work out what your LED wall and equipment need beforehand.
- More power, CEE16 or CEE32, can be ordered in the exhibitor shop in the exhibitor portal – for stands from 9 m².
- Connections to the hall supply are made by Lokhalle staff only. Please do not connect anything yourself.
- Conductive stand parts, such as your own truss, must be bonded to earth. Lokhalle staff do this too, for a fee.
- Your equipment must comply with German VDE safety standards.
Lokhalle stand rules
All exhibitors must follow the Lokhalle’s trade fair and exhibition rules. The key points:
Class B1 materials
Stand materials must be at least flame-retardant (B1 under DIN 4102). The Lokhalle may ask for proof.
Keep aisles clear
Aisles are at least 2.50 m wide and must stay clear. Nothing beyond your stand boundary; keep emergency exits and extinguishers accessible.
Nothing fixed to the floor
No drilling, no anchoring. Lay cables so that nobody can trip.
Residue-free tape only
Use only tape that comes off without residue for markings.
60 dB(A) maximum
Audio and video demos need approval. Music at 60 dB(A) maximum; you register music with GEMA and GVL yourself.
No empties on the stand
Do not store empty packaging, boxes or crates on your stand or in the hall. We will tell you where they can go.
CE marking
Products without CE conformity may only be shown with a clearly visible sign saying so.
Lasers and haze need approval
Lasers, haze, pyrotechnics, radio and high-frequency equipment only by arrangement and with the Lokhalle’s approval.
Heat and fire
Heat-producing devices only on a non-combustible base. Smoking is not allowed in the hall.
Maximum height 2.75 m
Stands are at most 2.75 m high: LED walls up to 2.5 m plus their support structure. Large truss constructions are not planned.
Fire extinguisher
The Lokhalle recommends keeping a suitable, inspected fire extinguisher on your stand.
Promotion on your own stand
Handing out leaflets or putting up signs outside your stand needs approval from us and the Lokhalle.
Based on the GWG/Lokhalle trade fair and exhibition rules, November 2021 edition. You will receive the binding text with the exhibitor documents. Full text from the Lokhalle (PDF, German) (opens in a new tab)
Breakdown
- Breakdown starts on Thursday at 4 pm. Friday is a reserve day only.
- Leave your space as you found it: remove all tape, take rubbish and packaging with you.
- Anything left behind will be disposed of at a charge.
- Please report any damage to floors, walls or equipment to us straight away.
Exhibitor guide
Everything for exhibitors in one place, ready to print and share with your team.
Download the exhibitor guidePDF, 1.3 MB
Still to be confirmed
- to followTimes for build-up, deliveries and breakdown
- to followWhich gate to use
- to followWhere empty packaging goes
- to followExhibitor shop for power, furniture and LED walls
- to followHotel room block for exhibitors
Questions about deliveries?
Email or call us. We will sort it out with the Lokhalle.